|
 |
 |
Thermo-syphon system
Thermo-syphon solar water heater system relies on the natural circulation of water
between the collector and the tank or heat exchanger. In this type of installation, the
tank must be located above the collector. As water in the vacuum tubes is heated, it
becomes lighter and naturally rises into the tank, Meanwhile, cooler water in the tank
flows down to the bottom of the vacuum tubes, causing circulation throughout the system.
These systems move household water or a heat-transfer fluid through the system without
pumps. This kind of passive systems have the advantage that electricity outage and
electric pump breakdown are not issues. This makes passive systems generally more
reliable, easier to maintain, and often inexpensive. |
Features
* Inner tank: Stainless steel (SUS304 2B)
Thickness: 0.5
Cr:17.00~19.00 %
Ni: 8.00~10.00 %
* Outer tank: Stainless steel (SUS304 2B)
Thickness: 0.6
* Insulating layer: Foaming polyurethane
Thickness: 55
Thermal transfer rate:0.022W/m.K
* Sealing rubber: silicon rubber
* Dustproof rubber: EPDM
* Optional Auxiliary Electric Booster: 1500w
* Optional Controller and automatic filling valve or assistant tank
* Highly efficient all glass vacuum tube
* Cheap but reliable solution, Simple structure, Easy installation
* Operation without any power supply could be
* Could be installed using parallel and/or series connections
* Hot water can be used directly for, or can be used as a pre-heat |
|
|
|
 |
|
|
|
